DEV Community

Cover image for Preview environments per Pull Request using AWS CDK and Github Actions
Julien Goux
Julien Goux

Posted on

Preview environments per Pull Request using AWS CDK and Github Actions

TL;DR The code is πŸ‘‰ here πŸ‘ˆ. The rest of this post gives information and context about it.

πŸ“– Table of contents

πŸ‘‹ Introduction

One of the biggest challenges today when delivering software is to move fast. Moving fast and keeping a high quality and confidence in your code is not an easy task. Having a tight feedback loop is our number one priority at Clovis.

Services like Vercel, Netlify, Render, Qovery or Railway are all working toward that goal, making our lives way easier. All these platforms allow us to quickly iterate, delivering value by focusing only on our code and forgetting about the nightmare that devops can be. I'm grateful for each of them.

But what if devops could be good old regular code? So accessible that you could actually spin up your entire infrastructure in few lines of code. By directly using a cloud provider you have no more limits, at a lower cost!

As an example, I'm going to show you how to setup preview environments in your Pull Requests on Github, using AWS CDK and Github Actions. Preview environments are a terrific tool to share your work before it goes to production or to run end-to-end tests. It gives a lot of confidence to have a mirror of your production infrastructure to play with.

🎯 Target

At the end of this tutorial, we should be able to :

  • Trigger a preview environment deployment by labelling a Pull Request with πŸš€ deploy
  • As long as the Pull Request is labeled with πŸš€ deploy, we should have our preview environment updated on each push
  • When the label πŸš€ deploy is removed from the Pull Request or the Pull Request is closed, the preview environment should be destroyed
  • All the deployments should be integrated with Github Deployments API to have useful feedbacks from within the Pull Requests or on the repository's home page

βœ… Prerequisites

☁️ AWS

Architecture

post

The architecture is composed of CloudFront (CDN) in front of a private S3 Bucket (file storage). CloudFront serves the sources stored in the bucket to the outside world.

CDK

The AWS Cloud Development Kit is an open source software development framework to define your cloud application resources using familiar programming languages such as TypeScript in the context of this post.

TypeScript gives us autocompletion and type safety on every part of our infrastructure, no more back and forth with the documentation, everything is available with a few keystrokes.

You can forget the hundreds of lines of CloudFormation yaml files or the confusing AWS Console UI. As an infrastructure as code framework, CDK is an abstraction over these low level constructs with sensible defaults.

File structure

A typical CDK project is composed of :

  • bin/app.ts the main file instantiating the stacks and called by the cdk CLI
  • lib/*-stack.ts the stacks implementations
  • cdk.json the configuration file for the cdk CLI

Let's see what is inside each of these files.

cdk.json

{
  "app": "yarn ts-node bin/app.ts",
  "context": {
    "@aws-cdk/core:newStyleStackSynthesis": true
  }
}
Enter fullscreen mode Exit fullscreen mode

The app key is used to tell cdk how to start our app.

The context key can contain feature flags like the one used here. In a future release of the AWS CDK, "new style" stack synthesis will become the default, but for now we need to opt in using the feature flag.

bin/app.ts

import * as cdk from '@aws-cdk/core';

import AwesomeStack from '../lib/awesome-stack';

const app = new cdk.App();

/**
 * The name of the stack depends on the STAGE environment variable so we can deploy the infrastructure multiple times in parallel
 * @example
 * AwesomeStack-pr-1-awesome-branch
 * AwesomeStack-production
 */
const stackName = 'AwesomeStack-' + process.env.STAGE;

new AwesomeStack(app, stackName);
Enter fullscreen mode Exit fullscreen mode

The stack's name is an important concept. This is what we will be referring to when deploying with the cdk CLI. You can note that in our case, this name depends on a STAGE environment variable. This allow us to dynamically deploy a whole new stack by Pull Request as the STAGE variable is derived from the Pull Request number and the branch name (more on this later)!

lib/awesome-stack.ts

import * as cloudfront from "@aws-cdk/aws-cloudfront";
import * as cloudfrontOrigins from "@aws-cdk/aws-cloudfront-origins";
import * as s3 from "@aws-cdk/aws-s3";
import * as s3Deployment from "@aws-cdk/aws-s3-deployment";
import * as cdk from "@aws-cdk/core";

/**
 * The CloudFormation stack holding all our resources
 */
export default class AwesomeStack extends cdk.Stack {
  constructor(scope: cdk.Construct, id: string, props?: cdk.StackProps) {
    super(scope, id, props);

    /**
     * The S3 Bucket hosting our build
     */
    const bucket = new s3.Bucket(this, "Bucket", {
      autoDeleteObjects: true,
      removalPolicy: cdk.RemovalPolicy.DESTROY,
    });

    /**
     * The CloudFront distribution caching and proxying our requests to our bucket
     */
    const distribution = new cloudfront.Distribution(this, "Distribution", {
      defaultBehavior: {
        origin: new cloudfrontOrigins.S3Origin(bucket),
        viewerProtocolPolicy: cloudfront.ViewerProtocolPolicy.REDIRECT_TO_HTTPS,
      },
      defaultRootObject: "index.html",
    });

    /**
     * Output the distribution's url so we can pass it to external systems
     */
    new cdk.CfnOutput(this, "DeploymentUrl", {
      value: "https://" + distribution.distributionDomainName
    });

    /**
     * Upload our build to the bucket and invalidate the distribution's cache
     */
    new s3Deployment.BucketDeployment(this, "BucketDeployment", {
      destinationBucket: bucket,
      distribution,
      distributionPaths: ["/", "/index.html"],
      sources: [s3Deployment.Source.asset('./website')],
    });
  }
}

Enter fullscreen mode Exit fullscreen mode

The stack class is the unit where we declare all the resources that will be created during the deployment. To create a stack you need to extend the cdk.Stack class.

The removalPolicy is often available on stateful resources such as S3 bucket or RDS databases. The default is to keep you from making a mistake so data are kept after destroying an environment. In our case we want to clean-up everything so we have to tell AWS to explicitly DESTROY our bucket.

At the beginning of this post I talked about CDK providing sensible defaults. The general rule is that every resource you create is private by default. It means that if you want to expose them you have to do it explicitly. Security wise this is a very good point. The objects in our bucket here are not publicly accessible, only CloudFront can read them.

cdk.CfnOutput is a construct that allow you to export arbitrary values at the end of the deployment. It will be very useful to pass the deployed URL to Github Deployment API.

This is it, this is our infrastructure, in 30 lines of actual code. Not bad!

CLI

Now that the infrastructure is sorted out, let's see how we interact with the CDK CLI. I defined 3 main commands as scripts in the package.json file.

yarn bootstrap

CDK_NEW_BOOTSTRAP=1 cdk bootstrap --cloudformation-execution-policies arn:aws:iam::aws:policy/AdministratorAccess
Enter fullscreen mode Exit fullscreen mode

Deploying AWS CDK apps into an AWS environment (a combination of an AWS account and region) may require that you provision resources the AWS CDK needs to perform the deployment. These resources include an Amazon S3 bucket for storing files and IAM roles that grant permissions needed to perform deployments. The process of provisioning these initial resources is called bootstrapping. More infos here.

Basically you need to call this command manually only once per account/region you want to deploy to.

yarn deploy

cdk deploy "AwesomeStack-${STAGE}" --require-approval never --outputs-file cdk.out.json
Enter fullscreen mode Exit fullscreen mode

This command reads from the cdk.json config file and triggers the deployment of the resources. Here I specified that I don't want it to be interactive (I accept all the resources/roles creation). Also I save all the values exported with cdk.CfnOutput to a json file.

If you run the command multiple times, CloudFormation will diff your changes automatically and only update the resources accordingly!

You can notice that in order to run this command, I expect to have the STAGE environment variable set. Also, I'm only targeting a single stack but cdk deploy also accepts globs if you have multiple stacks to deploy.

yarn destroy

cdk destroy "AwesomeStack-${STAGE}" --force
Enter fullscreen mode Exit fullscreen mode

Here is the destruction of the stack on AWS, the --force option is used to be non interactive as we'll call these commands inside our Github Actions.

This concludes the infrastructure part of this post, I hope you're still there for the automation!

πŸ€– Github automation

Github Deployments API

Github has dedicated UIs and status integration when deploying code in a repository. It's pretty deep in their REST API and I didn't notice a lot of adoption for this feature.

I see a lot of benefits using it :

  • Having nice feedbacks directly in the Pull Request about the status of the current deployment.
  • Seeing all the active deployments from the repository's home page.
  • Automatic communication with third-party services such as Checkly that need infos about the deployments in order to start their own workflow.

Github as the concept of environment to group deployments together in a sequential way. In our case we will create one environment per Pull Request.

Github Actions

GitHub Actions makes it easy to automate all your software workflows, now with world-class CI/CD. Build, test, and deploy your code right from GitHub.

One of the big strength of Github Actions is its ecosystem and marketplace. As someone using a lot of OSS packages on npm I feel like home, there is always a package to achieve what I want!

To achieve our automation target, we will need 2 actions. One for the deployment of the stack during the lifecycle of the Pull Request, and one for cleaning everything up when the Pull Request is closed.

Pull Request deploy

This first action is triggered in two cases :

  • When you add the label πŸš€ deploy on the Pull Request
  • When you open or push to a Pull Request labeled with πŸš€ deploy. The push event on a Pull Request is part of the synchronized event.

The first deployment will create all the resources for the environment and is often the slowest. Subsequent deployments will be way faster as CloudFormation diff the changes and only update the required resources.

In order to have one isolated environment per Pull Request we need to derive the STAGE environment variable from the Pull Request number and the branch name so the resulting stack name is unique to our Pull Request on AWS. I made a special step for this purpose.

There is a last npm script that I didn't mention earlier that eases the passage of the deployment's url from the step deploy the stack on AWS to the step update the github deployment status, the postdeploy script :

node --eval "console.log('::set-output name=env_url::' + require('./cdk.out.json')['AwesomeStack-${STAGE}'].DeploymentUrl)"
Enter fullscreen mode Exit fullscreen mode

It reads the DeploymentUrl exported by the cdk.CfnOutput in the cdk.out.json after the deployment is over. Then it set the value as a step's output in order to be accessible by the next steps.
The postdeploy script is automatically called after the deploy script thanks to the pre and post scripts convention.

Notable actions from the community which were very convenient in this workflow :

  • rlespinasse/github-slug-action exposes the slug/short values of some GitHub environment variables inside the workflow. It allowed me to directly get a slug version of the branch name to build the STAGE environment variable. (refs/heads/feat/new_feature -> feat-new-feature)
  • aws-actions/configure-aws-credentials configures AWS credential and region environment variables for use in other GitHub Actions. The environment variables will be detected by all AWS tools to determine the credentials and region to use for AWS API calls.
  • bobheadxi/deployments is abstracting over the Github Deployments API and makes it a breeze to create/update/delete Github deployments.
name: "Pull Request deploy"

on:
  pull_request:
    types: [labeled, opened, synchronize]

jobs:
  deploy:
    if: |
      (github.event.action == 'labeled' && github.event.label.name == ':rocket: deploy') ||
      (github.event.action != 'labeled' && contains(github.event.pull_request.labels.*.name, ':rocket: deploy'))
    runs-on: ubuntu-latest
    steps:
      - name: inject slug/short variables
        uses: rlespinasse/github-slug-action@v3.x

      - name: set STAGE variable in environment for next steps
        run: echo "STAGE=pr-${{ github.event.number }}-${{ env.GITHUB_HEAD_REF_SLUG }}" >> $GITHUB_ENV

      - name: create a github deployment
        uses: bobheadxi/deployments@v0.5.2
        id: deployment
        with:
          step: start
          token: ${{ secrets.GITHUB_TOKEN }}
          env: ${{ env.STAGE }}
          ref: ${{ github.head_ref }}
          no_override: false
          transient: true

      - name: checkout the files
        uses: actions/checkout@v2

      - name: install node dependencies
        uses: bahmutov/npm-install@v1

      - name: configure AWS credentials
        uses: aws-actions/configure-aws-credentials@v1
        with:
          aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
          aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
          aws-region: eu-west-3

      - name: deploy the stack on AWS
        id: cdk_deploy
        run: yarn deploy

      - name: update the github deployment status
        uses: bobheadxi/deployments@v0.5.2
        if: always()
        with:
          step: finish
          token: ${{ secrets.GITHUB_TOKEN }}
          status: ${{ job.status }}
          deployment_id: ${{ steps.deployment.outputs.deployment_id }}
          env_url: ${{ steps.cdk_deploy.outputs.env_url }}
Enter fullscreen mode Exit fullscreen mode

Pull Request clean-up

The clean-up action is triggered in two cases :

  • When you remove the label πŸš€ deploy from the Pull Request
  • When you close the Pull Request labeled with πŸš€ deploy. The closed event is also emitted after the Pull Request is merged as it's automatically closed by Github.

This actions ensures that your preview environment is destroyed on AWS as soon as you don't need it anymore. It also delete the associated Github deployments so you don't see them in the UI anymore.

Notable action from the community which was very convenient in this workflow :

  • strumwolf/delete-deployment-environment finds and delete all deployments as well as the GitHub environment they are deployed to. We can't delete a Github environment if it contains any non inactive deployment. This action marks all the deployments as inactive and delete the whole chain.
name: "Pull Request clean-up"

on:
  pull_request:
    types: [unlabeled, closed]

jobs:
  clean-up:
    if: |
      (github.event.action == 'unlabeled' && github.event.label.name == ':rocket: deploy') ||
      (github.event.action == 'closed' && contains(github.event.pull_request.labels.*.name, ':rocket: deploy'))
    runs-on: ubuntu-latest
    steps:
      - name: inject slug/short variables
        uses: rlespinasse/github-slug-action@v3.x

      - name: set STAGE variable in environment for next steps
        run: echo "STAGE=pr-${{ github.event.number }}-${{ env.GITHUB_HEAD_REF_SLUG }}" >> $GITHUB_ENV

      - name: checkout the files
        uses: actions/checkout@v2

      # there is a bug with the actions/cache used in bahmutov/npm-install@v1 on "closed" event
      # more infos here : https://github.com/actions/cache/issues/478
      - name: install node dependencies
        run: yarn --frozen-lockfile

      - name: configure AWS credentials
        uses: aws-actions/configure-aws-credentials@v1
        with:
          aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
          aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
          aws-region: eu-west-3

      - name: destroy the stack on AWS
        run: yarn destroy

      - name: delete the github deployments and the corresponding environment
        uses: strumwolf/delete-deployment-environment@v1.1.0
        with:
          token: ${{ secrets.GITHUB_TOKEN }}
          environment: ${{ env.STAGE }}
Enter fullscreen mode Exit fullscreen mode

πŸ“Έ Workflow in pictures

πŸš€ deploy added on the Pull Request, imminent take-off
image

Oops, something went wrong, let's fix this
image

New push, here we go again, the previous deployment is marked as Destroyed
image

YAY it worked!
image

Clicking on the View deployment link led me here, interesting
image

You can notice the new Environments block in the bottom right corner
image

πŸŒ‡ Conclusion

You now have all the building blocks to make your own workflow, how cool is that?! The cloud is the limit now!

Here are some ideas (and maybe future posts) :

  • Using your own custom domain to have pretty preview urls like https://pr-1-my-awesome-branch.jgoux.dev using AWS Route53.
  • Going full stack and serverless, adding lambdas and a RDS database to the stack with the same previews and isolation guarantees!
  • Generating infrastructure dynamically based on your application's code
  • Strategies to speed up the deployment with CDK and optimizing costs by splitting your stack into an always up and shared StableStack and temporaries DynamicStack-${STAGE}.

I want to use this post to thanks all the people that took the time to answer my numerous questions across Twitter, Github issues, Discord, Zoom, Slack and more recently the AWS CDK Slack community.

I can't list everyone, I ask too many questions πŸ˜‚, but I want to give a special thanks to Thorsten Hoeger and Kenneth Winner for proofreading this post. I'm very grateful to be in communities of such talented, open-minded and nice people.

This is my first post ever, over the years I greatly benefited from OSS and I want to give back to the community. ❀️

Don't hesitate to ping me on Twitter 🐦 if you want to chat about anything, my DMs are always open!

Top comments (8)

Collapse
 
naseem profile image
naseem

Such a great walkthrough! Thanks so much.

May I suggest the following enhancements:

  1. underscores in the gh head ref name can cause issues when AWS tries creating a stack with that name, as such pipe STAGE to tr '_' '-' to replace any underscores with dashes

  2. consecutive deploys that happen too soon will result in the deploy workflow failing cause a CREATE or UPDATE is already in progress, use github workflow's concurrency feature as follows, to prevent concurrent deploy workflows from running:

jobs:
  deploy:
    concurrency: deploy-pr-app-${{ github.head_ref }}
Enter fullscreen mode Exit fullscreen mode
Collapse
 
miklosxyz profile image
Miklos

If you want to listen to the deployment_status event by another workflow (for example, you want to run e2e tests on the deployment), be aware that you have to use a different token GITHUB_TOKEN. The github token cannot trigger other workflows, to prevent accidental recursion. Just create a personal access token, and use that instead.

Collapse
 
q0rban profile image
James Sansbury

Wow, super impressive! I love the attention to detail you put in here, even bringing in the GH deployment statuses.

For folks looking for this in a hosting-agnostic / non-AWS / GitLab / Bitbucket, or adding things like visual regression testing and Google Lighthouse reports, check out Tugboat.

Collapse
 
merlijnelderhuis profile image
Merlijn Elderhuis

Thanks so much for the writeup @jgoux!
Inspired me to build a similar environment for my team. Wrapping up some finishing touches, but this will help us a lot with our PR reviewing process.
Rather than using AWS CDK, I used Ansible for configurating a VM we have running. I use a Caddy reverse-proxy to map /prs/PR_NUMBER to the ports of different active PRs. Cheers!

Collapse
 
crohr profile image
Cyril Rohr

TIL about AWS CDK, thanks for the great post!

If you're interested to check a similar approach, I released a GitHub Action that encapsulates the whole workflow and allows to deploy any app from a single docker-compose file, by labelling a PR (as you do): github.com/pullpreview/action

Collapse
 
warns profile image
Mert Alnuaimi

This is perfect. I will be trying this whole thing today and see for myself and try some stuff. Thanks for sharing!

Collapse
 
kempsterrrr profile image
Will Kempster • Edited

This is brilliant @jgoux , thank you for putting it together it's really helping my get my deployments working nicely with CDK.

Collapse
 
dmessing profile image
Dave Messinger

This is really awesome!